Epson SC-F9200 Series Service Manual page 248

SC-F9200 Series
7. Disconnect all cables from the connectors on the Sub-F Board.
8. Remove the four screws, and remove the Sub-F Board.
C)Silver M3x8 S-tite screw: 4 pcs

When installing the Sub-F Board, make sure to attach it in the
correct orientation as shown in Figure3-204.

Insert the two tabs of the Right Reel Cover into the two
positioning holes on the frame.
Right Reel Cover
DISASSEMBLY & ASSEMBLY
Tabs
Disassembly and Assembly Procedure
Sub-F Board
C
C
Figure 3-204. Removing the Sub-F Board
SE Group Confidential (Related Staff Only)
Revision B
C
C
248