Epson SC-F9200 Series Service Manual page 108

SC-F9200 Series
3.4.3.5 Right Cover
1. Remove the Media Loading Lever.
2. Remove the Panel Unit. (p101)
3. Remove the Right Upper Cover.
4. Remove the three screws, and remove the Right Cover.
A) Silver M3x8 P-tite screw with washer: 1 pcs
B) Silver M4x12 S-tite screw with washer: 2 pcs
Insert the two tabs of the Right Front Cover into the two
positioning holes on the Right Cover.
DISASSEMBLY & ASSEMBLY
(p210)
(p103)
Disassembly and Assembly Procedure
- Right side -
Right Front Cover
B
Tabs
Figure 3-27. Removing the Right Cover
SE Group Confidential (Related Staff Only)
Revision B
Right Cover
B
A
108