Tube Inner Cleaning - Epson SC-F9200 Series Service Manual

SC-F9200 Series

4.12.5 Tube Inner Cleaning

C H E C K
Due to the structure of this printer, you cannot replace only one
P O I N T
tank. Therefore, replacement of the tanks should be made
according to the combinations below.
•
BK and M
•
Y and C
REQUIRED TOOL
Cleaning Cartridge
EXECUTION MODE
Serviceman Mode
PROCEDURE
1. Activate the cleaning cartridges. (P. 331)
2. Remove the ink tanks. (P. 207)
3. Install the cleaning cartridges. (P. 207)
4. Turn the printer ON.
5. Start the Service Program and select
6. Select from All channels or Single
select the Ink Holder to be cleaned
to be cleaned (C/Y or M/Bk), and click [Run].
7. When the cleaning is finished, click [Finish].
8. Turn off the printer.
(P. 329)
9. Activate the ink tanks.
10. Remove the cleaning cartridges. (P. 207)
11. Install the ink tanks. (P. 207)
12. Turn on the printer.
13. Confirm that there are no errors.
ADJUSTMENT
Tube inner cleaning.
channel. When selecting Single channel, also
(Ink Holder 1 or Ink Holder 2) and the color
Ink Supply Related Checks and Adjustments
Figure 4-56. [Tube inner cleaning] Screen
SE Group Confidential (Related Staff Only)
Revision C
333