Epson SC-F9200 Series Service Manual page 201

SC-F9200 Series
16. Disconnect the CR FFC from the connector (CN100) on the Sub Board.
17. Remove the FFC clamp that secures the Head FFCs.
Sub Board
CN100
CR FFC
FFC Clamp
Figure 3-144. Removing the Ink Path Holder Assy
DISASSEMBLY & ASSEMBLY
18. Remove the six screws, and remove the two CR Stopper.
C) Silver M3x8 screw: 6 pcs
19. Remove the screw, and remove the CR Scale Mounting Plate.
D)Silver M3x6 Cup S-tite screw: 1 pcs
C A U T I O N
Disassembly and Assembly Procedure
Never remove or loosen the screw shown below.
C A U T I O N
Never remove!
C
C
C
C
CR Stopper
CR Stopper
Figure 3-145. Removing the CR Stopper
SE Group Confidential (Related Staff Only)
Revision B
CR Scale Mounting Plate
D
C
C
201