Epson SC-F9200 Series Service Manual page 32

SC-F9200 Series
Menu
Heat Off Timer
Printer Setup
Restore Settings
Nozzle Check
Maintenance
PRODUCT DESCRIPTION
Table 1-17.
Menu Item/Setting Values (shaded one is the default)
15 - 240 min
Yes
No
Print At Right
Print
Print At Center
Print At Left
Setup Menu
Control Panel
Explanation
Turns to the sleep mode automatically when no error is
occurring, no print job receiving or there are no operations on
the control panel. In this setting, sets the time to turn to the sleep
mode automatically. When the printer turns to the sleep mode,
the screen display on the control panel disappears, and all
Heaters and internal motors turn off to reduce power
consumption. When the optional additional dryer is installed,
the fan stops in the sleep mode. Button operations on the control
panel (except [P] button) recovers the screen display on the
control panel. However, when there are no operations in this
condition, the screen display disappears again in about 30
seconds. The printer wakes from the sleep mode completely and
recovers normally, only when the operation with a hardware
operation is executed such as receiving a print job or operating
the Media Set Lever.
When this is set to [Yes], returns the set values in [Printer
Setup] menus to their factory default.
Prints the check patterns. Check them visually and execute head
cleaning when blurring or space can be seen.
SE Group Confidential (Related Staff Only)
Revision C
32