Cleaning; Preliminary Check; How To Clean - Epson SC-F9200 Series Service Manual

SC-F9200 Series

5.5 Cleaning

5.5.1 Preliminary Check

REQUIRED TOOLS
Table 5-2. Cleaning Tools
Tool
Protective Glasses (commercial
Protect eyes from ink and Ink cleaner.
item)
Mask (commercial item) Protects your eyes and nose from ink and ink cleaner.
Maintenance kit (attached to this
Gloves, Cleaning Stick, Wiper, Wiper Cleaner included.
printer)
Waste cloth, brush (commercial
Wipe off stains inside the printer.
item)
Metallic or plastic (PP/PE) tray Place the used Cleaning swab or parts tainted with ink.
Cotton Swab For cleaning the Ink Mark Sensor and PW Sensor.
Placing used Cleaning swab or the like directly on the printer may
C A U T I O N
result in a permanent stain.
MAINTENANCE
Purpose
Cleaning

5.5.2 How to Clean

PRESSURE ROLLERS
1. Make sure the printer is turned off and the screen has turned off, and then unplug
the power cable from the outlet.
2. Leave the printer for a minute.
3. Open the front cover.
4. Raise the media loading lever.
5. Remove stains on the pressure rollers using a dry, soft cloth. (Slide a dry cloth
between the pressure rollers and the platen and over the upper part of the pressure
rollers to wipe the area.
Do not press strongly on the rollers when wiping. This may detach
C A U T I O N
the rollers.
SE Group Confidential (Related Staff Only)
Revision B
375