Epson SC-F9200 Series Service Manual page 190

SC-F9200 Series
Figure 3-131. Releasing the Cable

Leave the relay connectors at the main body side to reuse them.
C H E C K
P O I N T
Relay Connector

Leave the relay cable at the main body side to reuse them.
Figure 3-132
( )
DISASSEMBLY & ASSEMBLY
Clamps
No.6
No.26
Disassembly and Assembly Procedure
Relay cables are still connected
Figure 3-132. After Releasing the Cables
Regarding to SC-F9200 series which have films to extend the life,
C H E C K
P O I N T remove the double-stick tape which fixes the film before
performing Step 13.
(Refer to "3.4.5.11 CR HP Sensor" (p164)
is matched.)
Zoom in
SE Group Confidential (Related Staff Only)
Revision B
to make sure which type
double-stick tape
190