Auto Uni-D Adjustment; Auto Bi-D Adjustment; Colorimetric Calibration (Color Id) - Epson Stylus Pro 7710 Service Manual

Epson Stylus Pro 7700/7710/7900/7910/9700/9710/9900/9910
16. Disconnect four FFCs from the Printhead.
In the next step, to make it easier to remove the screw of the
C H E C K
P O I N T Printhead it is recommended to use the long shaft screwdriver.
17. Remove the three screws that secure the Printhead, and remove the Printhead.
Figure 4-119.
E) Silver, Phillips, Bind machine screw M2x6 (bit: No.1): three pieces
Be sure to refer to Chapter 5 "Adjustment"
A D J U S T M E N T
R E Q U I R E D
specified adjustments after replacing or removing the Printhead.
<Adjustment Item>
1. Counter Clear (Printhead)
2. Head Cleaning
3. Head Rank ID
4. Nozzle Check
5. AID Function Check
6. Head PG Adjustment
7. Printhead Slant Adjustment (CR)
8. Printhead Slant Adjustment (PF)
9.

Auto Uni-D Adjustment

10. Auto Bi-D Adjustment

11. Colorimetric Calibration (Color ID)

12. Print Image
DISASSEMBLY & ASSEMBLY
See Figure 4-119.
See
(see p283) and perform
Disassembly and Assembly Procedure
FFCs
E
E
Printhead
Figure 4-119. Removing the Printhead
Revision D
E
213