Xerox 6060 Hardware Installation And Facts page 93

OPTIONS
OPTIONS
6.
Remove the processor's top cover.
Stand facing the back of the processor.
Place your hands on the top cover. Applying
pressure with both hands, give one quick
push away from you. The processor cover
will move away from the back panel about
f'.
If the cover does not move, loosen the
screws a bit more and try again.
Move your hands to the sides of the top cover.
Applying pressure with both hands, lift up
on the cover with a quick pull. The sides will
release.
Figure 2-3. Give one quick push away from you.
Lower the back of the cover a little and begin
working the cover toward the front of the
processor.
If you look over the top to the front of the
processor, you will be able to tell when the
top cover has cleared the disk drives. When
it does, begin lifting the cover up until it is
completely off the processor.
2-61