Xerox 6060 Hardware Installation And Facts page 120

PRINTERS
630 API Printer
(continued)
_S_wi_·_tc_h_S_et_tm_·
-=ga...s _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ ·~----
3-12
The 630 API Printer has one 8-position switch and
a label that identifies the function and On/Off
position of each switch. Position all switches as
follows:
- Position switches 1, 2, 3, and 8 towards the
front of the printer (Offi.
• Position switches 4, 5, 6 and 7 towards the
back of the printer (On).
To change a switch setting, use the tip of a ball-
point pen or small screwdriver to push the switch
lever into the other position.
I
§]
B
PAUSE
BRESET
:~~
I
READY POWER
. I
OPERATOR
COMMAND
SWITCHES
I
1
OPERATING
I
STATUS
I
INDICATORS
I
Note: The "jumper strip" to the right of the
.r\
switches should not be covered with a jumper
plug.
PRINTERS