Xerox 6060 Hardware Installation And Facts page 104

OPTIONS
2-72
13.Ifyou are installing several NEUs:
• Insert the label NEU 1 -- Master into the
label holder of the unit at the far left.
~
• Replace the plastic strip. Insert one edge of ·'--'
the plastic strip first, then bend the strip so
that you can insert the other edge more
easily.
• Label additional units from left to right in
numerical order, as illustrated in Fig. 2-8.
NEU 1-Master NEU 2 NEU 3
Fig.ure 2-8. Labelling a row of NE Us
14. Locate a D8W modular cord.
15.Plugone end of the
DBW
cord into the OUT jack
of NEU 2, as illustrated in Fig. 2-9.
~
16.Plug the other end of the cord into IN jack
11
on
the NEU 1 -- Master (Fig. 2-9).
OPTIONS