Xerox 6060 Hardware Installation And Facts page 36

OPTIONS
2-4
6.
Align the edge connectors over the sockets. See
Fig. 2-4.
Edge Connector
Figure 2-4. Installing the memory board
7.
Insert the edge connectors into the sockets and
press down firmly until the board "snaps" into
place.
8.
Secure the memory board in the slot with the
screw removed earlier.
9.
Replace the top cover of the processor as
follows:
Lower the front of the cover into place. Press
in on the sides of the cover as you lower them
r \
into place, making sure the cover edges fit
inside the processor frame. See Fig. 2-5.
OPTIONS