Xerox 6060 Hardware Installation And Facts page 54

OPTIONS
2-22
1.
Loosen the two screws securing the bottom
cover of the processor. (The screws do not have
to come all the way out.)
~
.
J' •
,r,
1
; - ,
lii!liiiiiiil.:wm
l!illllillllll~
Figure 2-1. Location of
the
bottom co11er screws.
2.
Remove the processor's bottom cover.
Stand facing the back of the processor.
Place your hands on the bottom cover.
Applying pressure with both hands, give one
qwck push away from you. The processor
cover will move away from the back panel.
Lift up on the back of the cover and then
push it away from you off the front of the
·------·
processor.
~
3.
Locate the sockets for the new memory chips.
(You will use the last two rows of memory chip
sockets on the processor board. See Fig. 2-2.)
Figure 2-2. Location of
the
socleets on
the
processor
board
OPTIONS