Xerox 6060 Hardware Installation And Facts page 40

OPTIONS
2-8
Note: If you're installing a new system and
have added other options, check the option
instructions to determine if additional DIP
switch changes are required.
~
Reset Button
Figure 2-9. Replace the bottom cover.
15.
Replace the bottom cover of the processor.
- Position the front of the cover over the
RESET button
CAREFULLY
to avoid
~
damaging it. See Fig. 2-9 .
...
Figure2-10. Slide bottom cover into place.
- Slide the cover toward the rear of the
processor until it is in place. Be sure that the
edges of the cover fit over the processor
frame. See Fig. 2-10.
- Tighten the two screws to secure the bottom
cover.
OPTIONS