Xerox 6060 Hardware Installation And Facts page 48

OPTIONS
2-16
11.
Replace the top cover of the processor as
follows:
Figure 2-8. Replacing the top cover.
Lower the front of the cover into place. Press
in on the sides of the cover as you lower them
into place, making sure the cover edges fit
inside the processor frame. See Fig. 2-8.
Figure 2-9. Slide the cover into place.
With hands pressing firmly against the sides
of the cover, give one quick pull toward the
~
rear of the processor. Make sure the sides
I '
stay inside the processor frame. See Fig. 2-9.
Tighten the two screws on the back to secure
the top cover.
OPTIONS