Xerox 6060 Hardware Installation And Facts page 164

DIAGNOSTICS
4-6
When formatting has been completed, the
following message will appear:
FORMATTING . .. . FORMAT COMPLETE
PRESS 'ENTER' KEY TO CONTINUE
8.
Press the RETURN key.
You will return to the following screen:
TO EXIT CUSTOMER TEST PROGRAM DURING TESTING,
PRESS THE 'ctrl-break' KEYS
DO YOU WISH TO RUN THE TESTS IN AUTOMATIC MODE?
('O'
=
NO, '1'
=
YES)
9.
If you have a hard disk system, go to page 4-8.
If you have a dual floppy disk system, remove
the newly formatted disk and insert the other~
blank (or erasable) disk in the bottom drive/ ,
Then return to Step 3 on page 4-5, and format
the second disk.
When you have completed formatting both
disks, go to Step 3 on page 4-8.
DIAGNOSTICS