O PTIONS
2-6
10. Carefully turn the processor over and loosen
the two screws securing the bottom cover.
See
Fig.
2-7.
Figure 2
-7.
Location of bottom cover screws.
11.
Remove the processor's bottom
cover.
- Stand facing the back of the processor.
- Place your hands on the bottom cover.
Applying pressure with both hands, give one
quick push away from
you.
The processor cover
will move away from the back panel.
-
Lift up on the back of the bottom cover and then
push it away from you off the front of the
processor.
Dip SwitchO
Figure 2-8. Location of DIP Switch 0.
OPTIONS