Xerox 6060 Hardware Installation And Facts page 51

OPTIONS
OPTIONS
Note: If you're installing a new system and
have added other oP.tions, check the option
instructions to see if additional DIP switch
changes are required.
Reset Button
Figure 2-12. Replace the bottom couer.
1 7.
Replace the bottom cover of the processor.
- Position the front of the cover over the
RESET button
CAREFULLY
to avoid
damaging it. See Fig. 2-12.
Figure 2-13. Slide bottom couer into place.
- Slide the cover toward the rear of the
processor until it is in place. Be sure the
edges of the cover fit over the processor
frame. See Fig. 2-13.
- Tighten the two screws to secure the bottom
cover.
2-19