Xerox 6060 Hardware Installation And Facts page 49

OPTIONS
OPTIONS
12.
Carefully turn the processor over and loosen
the two screws securing the bottom cover. See
Fig. 2-10 .
Figure 2-10. Location of bottom couer screws.
13.
Remove the processor's bottom cover.
Stand facing the back of the processor.
Place your hands on the bottom cover.
Applying pressure with both hands, give one
quick push away from you. The processor
cover will move away from the back panel.
Lift up on the back of the cover and then
push it away from you off the front of the
processor.
Figure 2-11. LocationofDIPSwitchO.
14.
Locate DIP Switch O on the processor board.
See Fig. 2-11.
2-17