Xerox 6060 Hardware Installation And Facts page 35

OPTIONS
OPTIONS
The memory board must be installed in the row of
double sockets farthest from the disk drives.
option slot plate .....
't
Figure 2-3. Location for memory board
3.
Locate the position for the memory board.
4. Remove the screw and the option slot plate and
set them aside. See Fig. 2-3.
5. Locate the two wires connected to the back left
corner of the processor. Gently move the wires
back out of the way so you can insert the
memory board as shown in Fig.
2-4
on the next
page.
2-3