Xerox 6060 Hardware Installation And Facts page 16

INSTALLATION
1-8
Plug End
Figure 1-10. Connecting the mouse(optional).
2.
Connect the mouse to the keyboard.
- Look at the end of the plug on the mouse
cable. Notice that the ring around the pins is
wider on one side. Turn the plug so that the
~
wider side is down, as shown in Fig 1-10. / '
- Insert the mouse plug (matching plug to
connector) into the only connector on the
back of the keyboard. ·
- Secure the connection by tightening the two
screws on both sides of the plug. Take care
not to overtighten the screws.
- Put the ~ay card that came with the
mouse aside for now.
- Instructions for using the mouse and card
are provided in Section 5: Hardware
Features.
INSTALLATION