Xerox 6060 Hardware Installation And Facts page 143

PRINTERS
Model 34LQ Dot Matrix Printer
(continued)
PRINTERS
• Look at the back of the panel to identify the
operating switches. There are two 8-position
switches, labeled SOl and
S02,
one rotary
switch, labeled Rotary, and one 4-position
switch, labeled
S03.
• Begin with the 8-position switch labeled
SOL Position switch 8 towards the front of
the printer (On.) Position the other seven
switches toward the back of the printer (Off).
Note: Use the tip of a ballpoint pen or a small
screwdriver
to
change switch settings.
• Locate the switch labeled
S02.
Position all
eight of these switches towards the back of
the printer (Off).
• Set the rotary switch to 0.
• Locate the switch labeled
S03.
Position
switches 1, 3 and 4 towards the back of the
printer (Off). Position switch 2 towards the
front of the printer (On).
S01
8 1
6
5
4 3 2 1
f
ON OFF OFF OFF OFF OFF OFF OFF
0
F
F
S02
8
1 6 5 4 3
2
1
f
OFF OFF OFF OFF OFF OFF OFF OFF
0
F
F
S03
4
3
2
1
f
OFF OFF
ON
OFF
0
F
F
3-35