Page 2
Xerox, The Document Company, the digital X, the Xerox DocuTech, the Xerox DocuPrint, the Xerox DocuColor and the Xerox Nuvera Digital Production System are trademarks of, or licensed to, Xerox Corporation. Classic Series Cover is a registered trademark of Coverbind.
Xerox DocuColor 2045/2060/5252/6060/7000/8000 Digital Production Press – provides information about Limitations, System Dependencies and Configuration Guide. • Xerox DocuPrint 75 / 90 & DocuTech 75 / 90 - provides information about Limitations, System Dependencies and Configuration Guide. • Xerox Nuvera 100 / 120 Digital Production System –...
Contact Information Coverbind is Bindomatic’s US subsidiary. For support in the United States, please contact: Coverbind 3200 Corporate Drive, Wilmington, NC 28405 Phone 1-800-366-6060 & 910-799-4116, Fax 910-799-3935 E-mail info@coverbind.com For support in Europe, please contact: Bindomatic AB Box 42101, SE-126 14 Stockholm, Sweden Phone +46 8 709 58 00, Fax +46 8 18 86 52 E-mail info@bindomatic.se...
Xerox Document Binder 120-D (DB120-D) 1. Product Overview Document Binder DB120-D The Document Binder DB120-D uses a unique perfect binding technology combined with pre-formed covers to create a high quality professionally bound document. The DB120-D binds 8.5” x 11” (A4 in Europe) documents up to 120 pages in a variety of ready available, wide range of standard covers.
Install Planning This Install Planning guide will help you prepare for the installation of the DB 120-D. Device Configurations The Document Binder 120-D components are: • Document Binder 120-D Space Requirements The space requirements illustration provides machine footprint as well as the overall operating and maintenance area. In addition to the diagram, there should be a minimum of 78 inches (1,981mm) clearance from the floor to the nearest overhead obstruction.
Page 10
17 inches 432 mm 75 / 90 75 / 90 Bypass Finisher Transport 23 inches 584 mm Note: The space requirement diagrams for the DB 120-D are representations only and not drawn to scale. Dimensions Document Binder 120-D Width x Depth x Height 56”...
Electrical Requirements The recommended location of the electrical wall outlet, mounted on a rear wall is to be no more than 6 feet (1,829mm) away from the rear center of the Document Binder 120-D. Device North America Document Binder120-D 115 VAC, 60 Hz, 7A Power cord: 6 - 8 ft (1,829 –...
White, Black, Red, Gray, Blue Custom Wrap around covers with customized color printing, foil stamping or die - For custom covers, contact your Xerox sales representative (or visit http://www.xerox.com, and select Supplies) for more information. Reorder # White 3R8860 – 3R8864...
Page 13
You can reach the Xerox Supplies Marketing Center using the following toll-free phone number: • United States 1-800-822-2200 • Canada 1-800-668-0199 For Europe, please visit the Xerox web site and select your country: http://www.xerox.com Reorder # White 3R93676 - 3R93680 Black 3R93701 - 3R93705...
2. Xerox DocuColor 2045 / 2060 / 5252 / 6060 / 7000/ 8000 Digital Color Press Limitations • When connected inline with a printer, the minimum binding capacity is 3 sheets / 2045, 4 sheets / 2060 and 2 sheets / 5252, 6060, 7000 and 8000 using 20lbs (75 gsm) bond paper.
3. Xerox DocuPrint 75 / 90 & DocuTech 75 / 90 Limitations • When connected inline with a printer, the minimum binding capacity is 5 sheets for 75 PPM and 6 sheets for 90 PPM using 20lbs (75 gsm) bond paper. (In walk-up manual mode, the minimum binding capacity is 1 sheet 20 lbs (75 gsm) bond paper.
4. Xerox Nuvera 100 / 120 Digital Production System Limitations • A Finisher Transport Module is required for in-line connectivity to the printer. • Coated paper is functional with the 860mm input height but not recommended for the 1021mm input height. However, binding test could be done and binding strength confirmed/checked before start of job/production.
Configuration Guide The Configuration Guide contains diagrams over the various Finishing Solutions that are available. Printer Configurations Productivity Guide The DB120-D will keep up with the rated speed of the printer. Finisher Configurations currently not supported. DB120D A DS5000 is required.
For installations made in the US and Canada, a copy of the signed Customer Agreement must A) Attached to the XOA / Customer purchase order and faxed to SPA: 1-800 –407-8430. B) Scanned and emailed to Phil.Schmelzlen@xerox.com, or faxed to Phil Schmelzlen (585) 427-3140 (8*227-3140).