Xerox 6060 Hardware Installation And Facts page 106

OPTIONS
2-74
• Locate the DW8A-DE modular cord that was
packaged with your XC 22 Network Access
Board.
• Determine whether the cord is long enough
to connect the workstation to an NEU.
If
not, connect it to another DW8A-DE cord
with a 451A Adapter (Fig. 2-10).
Figure 2-10 Connecting two modular cords with a 451A
Adapter
. Locate the OUT jack on your XC 22 board
(Fig. 2-11).
. Plug one end of the modular cord into this
OUT jack, and the other end into the first
unused IN jack on an NEU, beginning with
IN jack
1.
OPTIONS