Xerox 6060 Hardware Installation And Facts page 39

O PTIONS
OPTIONS
12.
Locate DIP Switch
O
on the processor board.
See Fig. 2-8.
13.
Determine your system's total memory using
the following as a guideline.
Your processor board has 256K RAM
(Random Access Memory).
Your memory board will have either 128K,
256K, or 384K. Check the label on the box
if
you're unsure.
If
you added memory chips, add 128K to the
tota l memory for each kit (group of 18 chips)
added .
Processor
Memory Total Dip
Board Board Memory
Switch O
2
3
4
256K
+
128K
=
384K
OFF OFF ON ON
2
4
256K + 256K 512K
ON ON OFF ON
4
256K
+
384K 640K OFF ON OFF ON
Chart2-1 . DIP Switch O switch positions 1 through 4 .
14.
Position the switches on Dip Switch 0.
Look in the total memory column above and
find the total memory for your system.
- To the right of the total memory column are
the switch positions for switches 1 through 4.
Do not change the positions of switches
5, 6,
7, and 8.
Look at DIP Switch
O
on the pr ocessor board
to determine which way is ON . (There ma y
be a very small
ON
somewhere on the switch.
ON may also be represented by the number 1
or an up arrow, and OFF, by the digit
0.)
Set switches 1 through 4. To change a switch
setting, use the tip of a ball point pen or
small screwdriver to push the switch lever
into the other position.
2-7