Xerox 6060 Hardware Installation And Facts page 30

INSTALLATION
1-22
18.
If your system completed its Self-Test
successfully:
• Be sure you leave the system on for 12 hours
in order to recharge the battery for the PC's~
internal clock.
Then
• Go to Section 3: Printers,
if you have a
printer to install, or
• Turn the page and learn how
to
get started
on your system, if you have no printer
to
install.
If your system did not complete its Self-Test,
and the screen remained dark or an error
message was displayed:
• Adjust the brightness and contrast controls.
• Turn the system off. Check to be sure all
plugs and connectors are secure. Check the("\
wall outlet to be sure it has power. (Plug in a
working lamp.) Plug the system back into
the outlet and turn it on again.
. If you still have a dark screen or an error
message, contact your service representa-
tive.
INSTALLATION