Xerox 6060 Hardware Installation And Facts page 41

OPTIONS
OPTIONS
16.
Return to Section 1: Installation, page 1-7 to
finish installing your system.
If you added a memory board to a system that
was already set up:
Connect all plugs to the back of the
processor.
Connect the power cord.
Turn the system on.
The screen will display a message indicating
the amount of total memory in the system.
If the new memory is properly installed, the
amount of memory displayed on the screen will
be the total amount of memory now installed in
your system.
If the screen indicates a different amount of
memory, remove the bottom cover and double
check the settings of DIP Switch 0.
2-9