Configuring Audio Settings; General Audio Settings - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Configuring Audio Settings

General Audio Settings

4–14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Adjust the volume of the speaker system. From the center of the room the
3
test tone should be as loud as a person speaking loudly, about 80-90 dBA
on a sound pressure level meter.
Some audio settings are unavailable when a SoundStructure digital mixer is
connected to the Polycom HDX system. For more information, refer to
Non-Polycom Microphones or a Mixer to a Polycom HDX System on page
To configure general audio settings:
Do one of the following
1
— In the local interface, go to System > Admin Settings >Audio > Audio
Settings (select
— In the web interface, go to Admin Settings > Audio Settings.
Configure these settings on the Audio Settings screen:
2
Setting Description
Sound Effects Volume Sets the volume level of the ring tone and user alert
tones.
Incoming Video Call Specifies the ring tone used for incoming calls.
User Alert Tones Specifies the tone used for user alerts.
Mute Auto Answer Specifies whether to mute incoming calls.
Calls
Incoming calls are muted by default until you press the
mute button on the microphone or on the remote control.
Enable Built-In Specifies whether the built-in microphones of the
Microphones Polycom HDX 4000 series display are enabled.
Polycom HDX 4500
Polycom HDX 4000 HD
Polycom HDX 4000
Internal Speaker Specifies whether to use the internal speakers. This
setting is selected by default, which means that the
Polycom HDX 4500
internal speakers are unmuted and being used. If this
Polycom HDX 4000 HD
Polycom HDX 4000 setting is not selected, the internal speakers are muted.
if necessary).
Connecting
4-9.
Polycom, Inc.