Polycom Touch Control Indicator Light; Polycom Eagleeye Director Indicator Light; Configuring The Polycom Hdx System; Setup Wizard - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Polycom Touch Control Indicator Light

Polycom EagleEye Director Indicator Light

Configuring the Polycom HDX System

Setup Wizard

1–16
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
When the Polycom Touch Control is on, the
The following figure shows the location of the power indicator light on the
back of the Polycom EagleEye Director.
This indicator light provides the following information:
Indicator Light
Steady blue light
Steady red light
Blinking red light
When you power on your system for the first time, the setup wizard detects
the system's IP and ISDN connections and leads you through the minimum
configuration steps required to place a call.
If you cannot see the user interface on the system's monitor, refer to
Video Format on page 12-7.
Home button is lit.
Power
Indicator
Status
Cameras are ready.
Cameras are powering on.
Factory restore on the cameras is starting.
Changing the
Polycom, Inc.