Administrator's Guide for the Polycom RealPresence Group Series
In the local interface, go to Settings > System Information > Diagnostics > Speaker Test.
In the web interface, go to Diagnostics > Audio and Video Tests > Speaker Test.
2 Click Start to start the speaker test.
3 Adjust the volume of the speaker system. From the center of the room the test tone should be as
loud as a person speaking loudly, about 80-90 dBA on a sound pressure level meter.
4 Click Stop to stop the speaker test.
Configuring Audio Settings
To configure the audio settings:
1 In the web interface, go to Admin Settings > Audio/Video > Audio.
2 Configure the settings for each section of the Audio screen that are described in this section of the
book.
Some audio settings are unavailable when a SoundStructure digital mixer is connected to the
Polycom RealPresence Group system. For more information, refer to
Microphones or a Mixer to a Polycom RealPresence Group System on page
General Audio Settings
Setting
Polycom StereoSurround
Sound Effects Volume
Ringtone
User Alert Tones
Mute Auto Answer Calls
Enable MusicMode
Polycom, Inc.
Description
Specifies that Polycom StereoSurround is used for all calls.
To send or receive stereo audio, make sure your Polycom RealPresence Group
system is set up as described in
Group 300, RealPresence Group 500, and RealPresence Group 550 Microphone
Inputs
on page 69 and
Connecting Audio Output
Sets the volume level of the ring tone and user alert tones.
Specifies the ring tone used for incoming calls.
Specifies the tone used for user alerts.
Specifies whether to mute incoming calls. Incoming calls are muted until you press
the Mute button on the microphone or on the remote control.
Note: You must first enable Auto Answer Point-to-Point Video or Auto Answer
Multipoint Video. These settings are in Admin Settings > General Settings >
System Settings > Call Settings. For details on these settings, see
Call Settings
on page 88.
Specifies whether the system transmits audio using a configuration that best
reproduces live music picked up by microphones.
Note: Noise suppression, automatic gain control, and keyboard noise reduction are
disabled when this setting is enabled.
Microphones and Speakers
Connecting Non-Polycom
Connecting Devices to the Polycom RealPresence
on page 72.
72.
Configuring
74