Powering The Polycom Hdx 4500 System On And Off - Polycom HDX 4000 Series Administrator's Manual

Powering the Polycom HDX 4500 System On and Off

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The indicator light on the side of the Polycom HDX 4000 systems provides this
information:
Indicator Light (Monitor Power)
Off
Steady blue light
Steady amber light
Rapidly blinking light
The indicator light next to the built-in camera in the Polycom HDX 4000
systems provides this information:
Indicator Light (Monitor Camera)
Off
Steady green light
Blinking green light
To power on the Polycom HDX 4500 system:
>> Press the power button on the side of the monitor.
The Polycom splash screen is displayed within about 10 seconds.
To power off the Polycom HDX 4500 system:
>> Press and hold the power button on the side of the monitor.
The monitor and the system power off.
To power off the Polycom HDX 4500 system monitor:
>> Press the power button on the side of the monitor.
The monitor enters standby mode. The system stays powered on.
Introducing the Polycom HDX Systems
Status
Monitor is powered off.
Monitor is powered on.
Monitor is in standby mode.
Monitor is not connected correctly to the
system. Verify that the monitor is connected
correctly according to the setup sheet you
received with the system.
Status
System is not in a call.
System is in a call.
System is in a call with the privacy shutter
closed.
1–13