Polycom HDX 4000 Series Administrator's Manual page 233

Administrator's Guide for Polycom HDX Systems
10–2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configure these settings:
2
Setting Description
Keypad Audio Specifies whether to play a voice confirmation of numbers
Confirmation selected with the remote control or keypad.
Numeric Keypad Specifies whether pressing number buttons on the remote
Function control or keypad moves the camera to presets or generates
touch tones (DTMF tones). If this is set to Presets, users
can generate DTMF tones by pressing
video screen.
Use Non-Polycom Configures the system to accept input from a
Remote programmable, non-Polycom remote control. In most cases
the Polycom remote works as designed, even when this
feature is enabled. However, try disabling this feature if you
experience difficulty with the Polycom remote. For more
information about Polycom HDX system IR codes, refer to
the Integrator's Reference Manual for Polycom HDX
Systems.
Channel ID Specifies the IR identification channel to which the Polycom
HDX system responds. Set the Channel ID to the same
channel as the remote control. The default setting is 3. If the
remote control is set to channel 3, it can control a Polycom
HDX system set to any Channel ID. For more information
about changing this setting, refer to
Control Channel ID
Chinese Virtual Specifies the type of onscreen keyboard to display for
Keyboard Simplified Chinese. This setting is only available when the
system's Language is set to Simplified Chinese.
Power Button Specifies the behavior of the remote control Power button.
Function
•
•
•
on page 10-3.
Power On or Off—Specifies that holding down the
Power button on the remote control powers off the HDX
system, and pressing the Power button when the
system is off powers the system on.
Sleep or Wake—Specifies that pressing the Power
button on the remote control puts the system to sleep or
wakes it up.
Disabled—Disables the Power button on the remote
control.
while on a
Configuring the Remote
Polycom, Inc.