Connecting Control And Accessibility Equipment; Connecting Non-Polycom Touch-Panel Controls; Connecting Ir Sensors To Polycom Hdx Systems - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Connecting Control and Accessibility Equipment

Connecting Non-Polycom Touch-Panel Controls

Connecting IR Sensors to Polycom HDX Systems

10–4
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To program the remote to control a recording device:
Press and hold the
1
Press the right arrow to select Set Code.
2
Enter the four-digit code for your recording device.
3
Press to select the new setting.
4
The remote control can also be used to control a Polycom RSS™ 4000 system
by sending audible DTMF tones across the call. For more information, refer to
the Polycom RSS 4000 User Guide available on the Polycom web site.
The Polycom HDX 9004 provides two serial ports. The Polycom HDX 9002,
Polycom HDX 9001, Polycom HDX 8000 series, Polycom HDX 7000 series, and
Polycom HDX 4000 series systems provide one serial port. Depending on your
system's capabilities, you may be able to use the RS-232 serial ports to:
• Connect a modem and use a closed captioning service
• Pass data from a device connected to your system to a device connected to
the far site system
• Control the system through a touch-panel using the API
• Provide control signals for an additional camera
• Provide control signals for a Polycom Vortex mixer
You will need to configure the RS-232 equipment according to the manufacturer's
instructions, and you will need to configure the RS-232 serial port on the system
exactly the same way.
Make sure that the system is powered off before you connect devices to it.
You can connect an AMX or Crestron control panel to a Polycom HDX 9000
series or Polycom HDX 8000 series system RS-232 serial port as part of a
custom room installation. You will need to program the control panel. Refer to
the Integrator's Reference Manual for Polycom HDX Systems for information
about the API commands.
The Polycom HDX 9000 series provides a connector for an external IR sensor.
Refer to your system's setup sheet for connection details.
Option button for 5 seconds.
Polycom, Inc.