Configuring Telephony - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Configuring Telephony

2–36
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
A connected SoundStation
phone line to make regular telephone calls when the Polycom HDX system is
configured as described in
The country setting must be configured correctly on the Polycom HDX system to
ensure proper operation of the phone line and to comply with local telephony
regulations.
To configure telephony options:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Network >
Telephony (select
— In the web interface, go to Admin Settings > Network > Telephony.
Configure these settings on the Telephony screen:
2
Setting
Room Telephone Number
System Telephone
Number
Polycom HDX 9000 series
Polycom HDX 8000 series
Polycom HDX 4000 HD
Polycom HDX 4000
Outside Line Dialing
Prefix
Polycom HDX 9000 series
Polycom HDX 8000 series
Polycom HDX 4000 HD
Polycom HDX 4000
To configure the analog phone line (POTS line):
Go to System > Admin Settings > Network > Telephony in the local
1
interface or go to Admin Settings > Network > Telephony in the web
interface.
Enter the System Telephone Number for the analog phone line.
2
® IP 7000 conference phone can use this analog
Configuring Telephony.
if necessary).
Description
Enter the telephone number of the room where the
system is located.
Specifies the analog phone number of the system,
including country and area codes for the system's
location.
Specifies the dialing prefix used to call outside the
network.
Polycom, Inc.