Positioning The Polycom Eagleeye Director - Polycom HDX 4000 Series Administrator's Manual

Positioning the Polycom EagleEye Director

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
When the Polycom Touch Control is not paired with a Polycom HDX system,
the device can be used as a virtual remote control. To use the Polycom Touch
Control as a virtual remote control, ensure that the infrared (IR) transmitter on
the front of the device is facing the Polycom HDX system you want to control.
When the Polycom Touch Control is paired with a Polycom HDX system, the
HDX system's IR remote control is inoperable.
The Polycom EagleEye Director is a new HD automatic camera positioning
system that works with Polycom HDX 9000 series, Polycom HDX 8000 series,
Polycom HDX 7000 series, and Polycom HDX 6000 series systems. Refer to
Polycom EagleEye Director
device.
Follow these guidelines when you use the Polycom EagleEye Director with
your HDX system:
• Avoid setting the Polycom EagleEye Director in the corner of a room. The
Polycom EagleEye Director should be at least 12 inches away from all of
the walls.
• Make sure the Polycom EagleEye Director is on a level surface or
mounting bracket.
• To ensure the best view from the Polycom EagleEye Director
voice-tracking feature, follow these suggestions:
— Set the Polycom EagleEye Director on top of a monitor. Ideally, place
the device between 5.5 and 7 feet from the ground.
≥12 in. (0.3 m)
5.5 - 7 ft. (1.7 - 2.1 m)
Introducing the Polycom HDX Systems
on page 3-17 for more information about the
>12 in. (0.3 m)
≥12 in. (0.3 m)
≥12 in. (0.3 m)
1–7