Polycom HDX 4000 Series Administrator's Manual page 167

Administrator's Guide for Polycom HDX Systems
6–14
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Description
Display Name in Specifies whether to display the system's name in the global
Global Directory directories of other registered systems.
Save Global When enabled, this setting allows Polycom HDX systems to
Directory to display global entries in the directory in case the system loses
System connection with the Polycom GDS Directory.
Group Name Specifies the group name used for Polycom GDS directory
entries in your directory. The default name for the Polycom
GDS group is Global Directory.
To configure the LDAP settings:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Global
Services > Directory Servers (select
Edit button to the right of LDAP.
— In the web interface, go to Admin Settings > Global Services >
Directory Servers and select LDAP.
Configure these settings on the LDAP screen.
2
LDAP Setting Description
Server Address Specifies the address of the LDAP directory server. With
Automatic Provisioning, this setting is configured by the server
and appears as read-only.
Server Port Specifies the port used to connect to the LDAP server. With
Automatic Provisioning, this setting is configured by the server
and appears as read-only.
Group Name Specifies the group name used for LDAP directory entries in
your directory. The default name for the LDAP group is Global
Directory.
Default Group Used with Multitiered Directory (MTD) navigation. Specifies the
Distinguished Name (DN) of the top-tier directory. For details,
refer to
Base DN Specifies the top level of the LDAP directory where searches
(Distinguished will initiate. With Automatic Provisioning, this setting is
Name) configured by the server and appears as read-only.
Authentication Specifies the protocol used for authentication with the LDAP
Type server: NTLM, BASIC, or Anonymous.
Use SSL Enables SSL for securing data flow to and from the LDAP
(Secure Socket server.
Layer)
if necessary) and select the
Using Multitiered Directory Navigation on page 6-9.
Polycom, Inc.