Information In The Cdr - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Information in the CDR

11–10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Every call that connects is added to the CDR, whether it is a call that you make
or that you receive. If a call does not connect, the report shows the reason. In
multipoint calls, each far site is shown as a separate call, but all have the same
conference number.
The CDR does not include incoming calls that the Polycom HDX system does
not answer, so if calls were missed while Do Not Disturb was enabled, details
will not be included in the CDR.
To view and download the CDR using the Polycom HDX web interface:
In your web browser address line, enter the HDX system's IP address.
1
Enter the Admin ID as the user name (default is admin), and enter the
2
Admin Remote Access Password, if one is set.
Click Utilities > Call Detail Report to view the details of the file.
3
Click Save and then specify a location on your computer to save the file.
4
The following table describes the data fields in the CDR.
Data Description
Row ID Each call is logged on the first available row. A call is a
connection to a single site, so there may be more than one
call in a conference.
Start Date The call start date, in the format dd-mm-yyyy.
Start Time The call start time, in the 24-hour format hh:mm:ss.
End Date The call end date.
End Time The call end time.
Call Duration The length of the call.
Account Number If Require Account Number to Dial is enabled on the
system, the value entered by the user is displayed in this
field.
Remote System The far site's system name.
Name
Call Number 1 The number dialed from the first call field, not necessarily
the transport address.
For incoming calls — The caller ID information from the first
number received from a far site.
Polycom, Inc.