Polycom HDX 4000 Series Administrator's Manual page 101

Administrator's Guide for Polycom HDX Systems
3–26
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Description
Detect Camera Detects any supported PTZ camera connected to
Polycom HDX system video input 1 and configures the
Polycom HDX 9006
camera settings accordingly.
Polycom HDX 9004
Polycom HDX 9002
Note: If a camera fails to wake up when the HDX
Polycom HDX 9001
system wakes up, try detecting the camera again.
Polycom HDX 8000 HD
Polycom HDX 7000 HD
Polycom HDX 7000
Polycom HDX 6000 HD
Camera 2 Specifies the camera's aspect ratio:
Polycom HDX 9006
•
Polycom HDX 9004
•
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD This setting also configures the following SD cameras to
produce the corresponding video format:
•
•
•
•
Specifies the camera's format. For a list of available
formats, refer to the information for your system in the
previous section of this chapter,
on page 3-15.
Name Specifies a name and icon for the camera.
Polycom HDX 9006
Note: If your HDX system is paired with a Polycom
Polycom HDX 9004
Touch Control and you change a camera icon on the
Polycom HDX 9002
HDX system, the Touch Control continues to show the
Polycom HDX 9001
default icon.
Polycom HDX 8000 HD
Source Specifies whether the camera source is People or
Content. Video sources specified as Content are sent
Polycom HDX 9006
at a higher resolution and lower frame rate.
Polycom HDX 9004
Polycom HDX 9002
Content sent to Polycom HDX 8000 systems displays at
Polycom HDX 9001
a maximum of 720p.
Video Quality Specifies Motion or Sharpness for the video input.
Polycom HDX 9006
•
Polycom HDX 9004
Polycom HDX 9002
•
Polycom HDX 9001
Polycom HDX 8000 HD
4:3 — Select if you are using a regular camera.
16:9 — Select if you are using a wide-screen
camera.
Polycom PowerCam Plus
Polycom PowerCam
Sony EVI-D100
Sony BRC-300
Connecting Cameras
Motion — This setting is for showing people or
other video with motion.
Sharpness — The picture will be sharp and clear,
but moderate to heavy motion at low call rates can
cause some frames to be dropped. Sharpness is
available in point-to-point H.263 and H.264 calls
only.
Polycom, Inc.