Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting
Description
Detect Camera
Detects any supported PTZ camera connected to
Polycom HDX system video input 2 and configures the
Polycom HDX 9006
camera settings accordingly.
Polycom HDX 9004
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD
Camera 3 (
Specifies the VCR or DVD player's aspect ratio:
Camera 2 on
Polycom HDX 7000 series)
•
Polycom HDX 9006
Polycom HDX 9004
•
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD
Specifies the VCR or DVD player's format. For a list of
Polycom HDX 7000 HD w/
available formats, refer to the information for your
Hardware Versions A,B,C
system in the previous section of this chapter,
Polycom HDX 7000
Connecting Cameras
Name
Specifies a name and icon for the VCR or DVD player.
Polycom HDX 9006
Note: If your HDX system is paired with a Polycom
Polycom HDX 9004
Touch Control and you change a camera icon on the
Polycom HDX 9002
HDX system, the Touch Control continues to show the
Polycom HDX 9001
default icon.
Polycom HDX 8000 HD
Polycom HDX 7000 HD w/
Hardware Versions A,B,C
Polycom HDX 7000
Source
Specifies whether the video source is People or
Content. Video sources specified as Content are sent
Polycom HDX 9006
at a higher resolution and lower frame rate.
Polycom HDX 9004
Polycom HDX 9002
Note: If you change this setting on a Polycom
Polycom HDX 9001
HDX 7000 series system, the Source for Camera 3 is
Polycom HDX 8000 HD
automatically changed to match this setting.
Polycom HDX 7000 HD w/
Hardware Versions A,B,C
Polycom HDX 7000
Video Quality
Specifies Motion or Sharpness for the video input.
Polycom HDX 9006
•
Polycom HDX 9004
Polycom HDX 9002
•
Polycom HDX 9001
Polycom HDX 8000 HD
Polycom HDX 7000 HD w/
Hardware Versions A,B,C
Polycom HDX 7000
Detect Camera
Detects any supported PTZ camera connected to
Polycom HDX system video input 3 (input 2 on Polycom
Polycom HDX 9006
HDX 7000 series), and configures the camera settings
Polycom HDX 9004
Polycom HDX 9002
accordingly. This button appears only when RS-232
Polycom HDX 9001
Mode is set to Camera PTZ and Camera Control is set
Polycom HDX 8000 HD
to Camera 3 (Camera 2 on Polycom HDX 7000 series)
Polycom HDX 7000 HD
for one of the serial ports.
Polycom HDX 7000
4:3 — Select if you are using a VCR or DVD player
in standard mode.
16:9 — Select if you are using a VCR or DVD player
in wide-screen mode.
on page 3-15.
Motion — This setting is for showing people or
other video with motion.
Sharpness — The picture will be sharp and clear,
but moderate to heavy motion at low call rates can
cause some frames to be dropped. Sharpness is
available in point-to-point H.263 and H.264 calls
only.
Monitors and Cameras
3–27