Setting Up The Room For People On Content; Enabling And Calibrating People On Content On The System - Polycom HDX 4000 Series Administrator's Manual

Setting Up the Room for People on Content

Enabling and Calibrating People on Content on the System

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
For the best results, follow these guidelines for People on Content:
• Polycom recommends using the Polycom EagleEye III camera when
setting up Polycom HDX 9000 series and Polycom HDX 8000 series
systems to use People on Content, although you can also use the Polycom
EagleEye HD and Polycom EagleEye 1080 cameras. Activating People on
Content automatically reduces a Polycom HDX system's resolution to
720p.
• Create a flat, consistent background color using a screen or matte-finish
paint in green or blue. Make sure that the background does not have
shadows or glare.
• Make sure that the background and the presenter are well lit. For example,
use a minimum of two 250 W halogen lights on the background and one
on the presenter.
• Experiment with different room arrangements, lighting, and
backgrounds.
250 W
3 ft
250 W
Before using People on Content, configure and calibrate the system so that
presenters can use People on Content during calls.
To configure and calibrate the system for People on Content:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Cameras >
People on Content.
— In the web interface, go to Admin Settings > Cameras.
250 W
Content and Closed Captions
5–7