Setting Up The Polycom Touch Control Device - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Setting Up the Polycom Touch Control Device

10–6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Description
RS-232 Flow When a Vortex is connected to an RS-232 connector on
Control the Polycom HDX system, set both to Hardware. This is
selectable when RS-232 Mode is set to Vortex Mixer or
Pass Thru.
Camera Control Specifies which camera to control when RS-232 Mode is
set to Camera PTZ.
Detect Camera Detects the camera specified for Camera Control.
For a Polycom HDX 9004, select
3
settings for port 2.
The Polycom Touch Control allows you to control a Polycom HDX system.
Follow these steps to get started with the Polycom Touch Control. For more
information, refer to the Setting Up the Polycom Touch Control and Installing
Software and Options for Polycom HDX Systems and Accessories documents.
You can manage the following features of the Touch Control remotely:
• System Logs
• Network Settings
• Pairing
• Security
• Software Updates
• Touch Control Screen Views
For more information, refer to
Remotely on page 10-10.
To set up the Polycom Touch Control Device:
Ensure that the correct software is installed on the Polycom HDX system
1
that you want to control, and that you have completed the setup wizard
on the HDX system.
Refer to Installing Software and Options for Polycom HDX Systems and
Accessories for more information about updating the Polycom Touch
Control software.
It is recommended that you install the latest compatible Polycom Touch
Control software for any given HDX system software version. For
additional details on HDX system software compatibility, refer to the
if necessary, and configure the
Managing the Polycom Touch Control
Polycom, Inc.