Polycom HDX 4000 Series Administrator's Manual page 166

Directory Servers Authentication
Supported Protocol
Microsoft Office NTLM
Communications
Server 2007 R2
Microsoft Lync NTLM
Server 2010
* To successfully call a phone number from the LDAP directory, the phone number must be stored in one of the
following formats:
• +Country Code.Area Code.Number
• +Country Code.(National Direct Dial Prefix).Area Code.Number
Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Global Directory
Groups
Contact groups but not
distribution lists
Contact groups but not
distribution lists
To choose a directory server:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Global
Services > Directory Servers (select
— In the web interface, go to Admin Settings > Global Services >
Directory Servers.
Enable LDAP, Polycom GDS, Microsoft Office Communications
2
Server, or Microsoft Lync Server.
To configure the Polycom GDS settings:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Global
Services > Directory Servers (select
Edit button to the right of Polycom GDS.
— In the web interface, go to Admin Settings > Global Services >
Directory Servers and select Polycom GDS.
Configure these settings on the Global Directory Servers screen:
2
Setting Description
Global Directory Specifies the IP address or DNS address of the Global
(GDS) Directory Server. You can enter up to five addresses.
Password Lets you enter the global directory password, if one exists.
Register Registers this system with the Global Directory Server.
Display Global Displays other registered systems in the global directory.
Addresses
Calling and Answering
Entry Calling Information
May include:
• SIP address (SIP URI)
May include:
• SIP address (SIP URI)
if necessary).
if necessary) and select the
6–13