Manually Setting White Balance; Configuring Uc Board - Polycom HDX 4000 Series Administrator's Manual

Administrator's Guide for Polycom HDX Systems

Manually Setting White Balance

Configuring UC Board™

5–8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configure these settings:
2
Setting Description
Foreground Specifies Camera 1 as the video source to display on top of
Source the background content.
Background Specifies the content video source to use for the
Content Source background image when using People on Content. Only
cameras configured as Content are available as a
Background Content Source. People+Content IP cannot be
used as a background content source.
Follow the instructions on the screen to calibrate the camera for People on
3
Content. Calibration does the following:
— A camera preset is created for the green screen area.
— The camera calibrates to the background color.
When you use People on Content, the automatic setting for white balance
might not provide a suitable picture. You can alleviate this problem by
changing the white balance setting manually. For more information about
setting the white balance, refer to
page 3-35. Polycom recommends that you use the White Balance setting choice
that best matches the room lighting where your HDX system is located.
With the Polycom UC Board, you can show and annotate content in real-time
from Polycom HDX systems by using the stylus and receiver included with the
UC Board hardware. You can use either a second monitor or a whiteboard and
projector.
Configuring Advanced Camera Settings on
Polycom, Inc.