Polycom HDX 4000 Series Administrator's Manual page 63

Administrator's Guide for Polycom HDX Systems
2–30
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Configure these settings:
2
Setting Description
Enable ISDN Allows this system to make H.320 (ISDN) calls.
H.320
Number of ISDN Specifies how many channels to dial at one time.
Channels to
You can specify up to 12 channels. If you experience network
Dial in Parallel
problems, decrease the number.
Outside Line Specifies the ISDN dialing prefix used to call outside the
Dialing Prefix network.
Numbering Select the appropriate numbering plan for your location, if it
Plan differs from the default.
ISDN Voice Specifies which voice algorithm (aLaw or uLaw) is used for
Algorithm ISDN voice calls.
Do not change this setting unless you experience audio issues
in all ISDN voice calls.
ISDN Switch Specifies the protocol used by your network's switch.
Protocols
Auto BRI Allows the NI-1 or NI-2 switch to automatically configure the
Configuration directory numbers and SPIDs.
This setting is only available if you have selected the NI-1 or
NI-2 switch protocol.
Country, Displays the country selected as the system's location and the
Country Code country code used for international calls to the system. To
specify the system's location, go to System > Admin Settings
> General Settings > Location. The system automatically
supplies the country code when you specify the country.
Area Code Specifies the area code for this system's location.
Directory Specifies the numbers assigned to the B1 and B2 channels for
Numbers each BRI line.
The two numbers for a line may be the same or different,
depending on the switch protocol in use.
Enable Specifies whether to enable the associated ISDN line.
If you selected Standard ETSI Euro-ISDN protocol, you must
enable all BRI lines that you expect to be active, and you must
not enable lines that will not be connected.
You may want to disable a particular line if there are problems
with the line that generate continuing error messages.
Polycom, Inc.