Configuring Multipoint Viewing Modes - Polycom HDX 4000 Series Administrator's Manual

Hide thumbs Also See for HDX 4000 Series:
Table of Contents

Advertisement

Administrator's Guide for Polycom HDX Systems

Configuring Multipoint Viewing Modes

3–12
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To configure multipoint viewing modes:
Do one of the following:
1
— In the local interface, go to System > Admin Settings > Monitors >
Multipoint Setup.
— In the web interface, go to Admin Settings > Monitors > Multipoint
Setup.
Configure this setting:
2
Setting
Description
Multipoint Mode
Video images from multiple sites can be automatically
combined on one screen in a display know as continuous
presence.
uninterrupted for at least 15 seconds, that site appears in
presentation mode.
What you see during a multipoint call can depend on factors such as the
Polycom HDX system monitor configuration, the number of sites in the call,
the speed of the call, whether content is shared, and whether dual monitor
emulation is used. The multipoint viewing mode on the host system is the
mode used in the call.
During SD multipoint calls that include more than four sites, the Polycom
HDX system can display the site that is hosting the conference along with the
last three sites where people spoke. In HD multipoint calls, the Polycom
HDX 9004 can display up to eight sites in continuous presence. For more
information about HD and SD multipoint, refer to
on page 3-40.
Auto — The view switches between continuous
presence and full screen, depending on the
interaction between the sites.
If multiple sites are talking at the same time,
continuous presence is used. If one site speaks
Discussion — Multiple sites are displayed in
continuous presence. The current speaker's
image is highlighted.
Presentation — The speaker sees continuous
presence while the other sites see the speaker in
full screen.
Full Screen — The site that is speaking is
shown in full screen to all other sites. The current
speaker sees the previous speaker.
HD and SD Multipoint Calls
Polycom, Inc.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents