Polycom HDX 4000 Series Administrator's Manual page 81

Administrator's Guide for Polycom HDX Systems
3–6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Description
Monitor 2 Specifies the second monitor's aspect ratio:
Polycom HDX 9006
•
Polycom HDX 9004
•
Polycom HDX 9002
Polycom HDX 9001
Polycom HDX 8000 HD •
Polycom HDX 7000 HD
Polycom HDX 7000
Polycom HDX 4500
The following setting is unavailable on Polycom
HDX 9004, HDX 9002, HDX 9001, and HDX 4500
systems:
•
Video Format Specifies the monitor's format. For a list of available
formats, refer to the information for your system in the
Polycom HDX 9006
previous section of this chapter,
Polycom HDX 9004
Polycom HDX 9002 page 3-1.
Polycom HDX 9001
Note: If you select 16:9, you will also need to set up the
Polycom HDX 8000 HD
monitor for full-screen display. In the monitor's setup
Polycom HDX 7000 HD
menu, choose the setting that stretches the picture
Polycom HDX 7000
uniformly without clipping the edges, which is usually
Polycom HDX 4500
called Full, Wide screen, or 16x9.
Use this setting:
Shrink Content For monitors configured for content, specifies whether to
shrink content to fit the monitor. If selected, the content
is shrunk to fit.
Resolution Specifies the resolution for the monitor.
Output Upon Screen Specifies the screen saver output for Monitor 2.
Saver Activation
Specifies whether black video or no signal is sent to the
monitor when the system goes to sleep and the screen
saver activates.
Select Black if you want to display black video. This is
the recommended setting to prevent burn-in for TV
monitors.
Select No Signal if you want the display to react as if it
is not connected when the system goes to sleep. This is
the recommended setting for VGA monitors and
projectors, as well as Polycom HDX media carts with
1080 displays.
Off — Select if you do not have a second monitor.
4:3 — Select if you are using a regular TV monitor
as the second monitor.
16:9—Select if you are using a wide-screen monitor
as the second monitor. On the monitor, select the
display mode that uniformly stretches the video from
side to side, which is usually called Full, Wide
screen, or 16x9.
Monitor 1 Image—Select to display the same
image that is displayed on Monitor 1.
Connecting Monitors
Not this setting:
on
Polycom, Inc.