Monitors And Cameras; Connecting Monitors; Connecting Monitors To Polycom Hdx 9000 Series Systems - Polycom HDX 4000 Series Administrator's Manual

Monitors and Cameras

Connecting Monitors

Connecting Monitors to Polycom HDX 9000 Series Systems

Polycom, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Make sure that the system is powered off before you connect devices.
The following table shows how you can connect monitors to a Polycom
HDX 9000 series system.
Video Output Number
1
2
3 (VCR/DVD Player)
4 (Content),
Polycom HDX 9004
* Select DVI if the monitor is connected using HDMI or DVI-D.
For Monitor 1 and Monitor 2, the system may provide both dual BNC
connectors and a DVI-I connector. Only one at a time is active, based on the
output format configured for that monitor.
The Polycom HDX system user interface is displayed on Monitor 1. If you
cannot see the user interface on the system's monitor, refer to
Video Format on page 12-7.
Connector Output Formats
Two BNC (not S-Video, Composite
available on
Polycom
HDX 9006)
DVI-I VGA, DVI*, Component
Two BNC (not S-Video, Composite
available on
Polycom
HDX 9006)
DVI-I VGA, DVI*, Component
BNC (two) S-Video, Composite
DVI-I VGA, DVI*, Component
3
Changing the
3–1