Configuring Audio Settings - Polycom VSX 7000 Administrator's Manual

Configuring Audio Settings

© Polycom, Inc.
1. Go to System > Admin Settings > Audio Settings.
2. Customize these settings:
This setting:
Sound Effects
Volume
Incoming Video Call
User Alert Tones
Mute Auto-Answer
Calls
3. Select and enter line input and output settings:
This setting:
Line Input (Red)
Line Input (White)
Line Outputs
Level
Allows you to:
Set the volume level of the ring tone and user alert tones.
Select the ring tone used for incoming calls.
Select the tone used for user alert tones.
Select whether to mute incoming calls.
Incoming calls are muted by default until you press the mute
button on the microphone pod or the remote control.
Allows you to:
Specify the equipment you are connecting to the audio input
connectors on the back of the unit – an audio mixer, or the audio
connections for a VCR.
Specify how the audio output behaves. The default selection,
Monitor - Far Site Audio, supplies audio to the Monitor 1 audio
outputs only when the system is receiving audio from the far site.
If you have connected a VCR to record the conference, select
VCR - Far and Near Audio to supply audio from both the far site
and the system's microphone pods to the VCR.
Set the volume level for the line with which it is associated.
Chapter 4 - Designing the User Experience
61