Polycom HDX 4000 Series Administrator's Manual page 316

Admin Settings Area/Setting
General Settings>Serial Port
RS-232 Mode
Network>IP Network
Enable SIP
Transport Protocol
Enable Network Intrusion Detection System (NIDS)
Note: Controlled only through the Security Mode
setting's "Auto" option, which means this setting is
enabled when Security Mode is enabled.
Cameras
Far Control of Near Camera
Enable People+Content™ IP
Note: Controls whether the HDX system accepts
connections from the People+Content IP client.
Enable UC Board/VisualBoard
General Settings>Pairing
Allow Polycom Touch Control to Pair with This System
SmartPairing Mode
Global Services>Directory Servers
XMPP
Note: Controlled only through CMA or RealPresence
Resource Manager system provisioning.
E–11
Medium
(Security Mode Enabled)
Range
Off
Control
Camera PTZ
Closed Caption
Pass Thru
Checkbox
Auto
TLS
TCP
UDP
Auto
(Enabled)
Checkbox
Checkbox
Checkbox
Checkbox
Disabled
Automatic
Checkbox
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Default
Value Configurable? Range
Off Yes
Control
Camera PTZ
Closed Caption
Pass Thru
Disabled Yes Checkbox
TLS Yes Auto
UDP
Auto Read Only Auto
Disabled Yes Checkbox
Enabled Yes Checkbox
Enabled Yes Checkbox
Disabled Yes Checkbox
Disabled Yes Disabled
Automatic
Disabled Yes Checkbox
Medium
(Security Mode Disabled)
Default
Value Configurable?
Off Off Yes
Disabled Yes
TLS Yes
TLS
TCP
Auto Read Only
(Disabled)
Disabled Yes
Enabled Yes
Enabled Yes
Enabled Yes
Disabled Yes
Disabled Yes
Security Profile Tables
Polycom, Inc.