Configuring Quick Start Using Edm - Avaya 5900 Series Quick Start Configuration

Connecting and configuring the switch
Please provide the Quick Start VLAN <1-4094> [1]:
Please provide the in-band IP Address[192.168.1.1]:
Please provide the in-band sub-net mask[255.255.255.0]:
Please provide the Default Gateway[0.0.0.0]:
Please provide the management sub-net mask[0.0.0.0]:
Please provide the management IP Address[0.0.0.0]:
Please provide the management Default Gateway[0.0.0.0]:
Please provide the Read-Only Community String[**********]:
Please provide the Read-Write Community String[**********]:
Please provide the in-band IPV6 Address/Prefix_length[::/0]:
Please provide the in-band IPV6 Default Gateway[::]:
Please provide the management IPV6 Address/Prefix_length[::/0]:
Please provide the management IPV6 Default Gateway[::]:
###############################################################################
Basic switch parameters have now been configured and saved.
###############################################################################
Switch#

Configuring Quick Start using EDM

Use the following procedure to configure the Quick Start setup mode using EDM.
About this task
You can use Quick Start to quickly setup a new switch or stack.
Procedure
1. From the navigation tree, double-click Administration.
2. In the Administration tree, click Quick Start.
3. In the work area, click the IP/Community/Vlan tab.
4. In the In-Band Switch IP Address field, type a switch or stack IP address.
5. In the In-Band Stack Subnet Mask field, type a subnet mask.
6. In the Default Gateway field, type a gateway IP address.
7. In the Read-Only Community String field, type a community string. Re-type the community
string in the verification field.
8. In the Read-Write Community String field, type a community string. Re-type the community
string in the verification field.
Note:
For security, enter different community strings for Read-Only and Read-Write.
9. In the Quick Start VLAN field, type a VLAN ID ranging from 1 to 4094.
10. On the toolbar, click Apply.
October 2015 Quick Start Configuration for Avaya ERS 5900 Series
Comments on this document? infodev@avaya.com
24